.jpg)
Sakti Suria (M) Sdn Bhd
Innoflow Marketing (M) Sdn Bhd
Doctrine Engineering
(M) Sdn Bhd
17 & 19, Jalan TPP 5/13,
Taman Perindustrian Puchong,
Seksyen 5, 47100 Puchong,
Selangor, Malaysia.
+603-80616868
+603-80617033
sales@saktisuria.comDoctrine Engineering
(M) Sdn Bhd (Johor Branch)
No.25, Jalan Mutiara Emas 7/10,
Taman Mount Austin,
81000 Johor, Malaysia.
+607-351 4948
+607-351 4951
sales@saktisuria.comPT.Doctrine Engineering
Indonesia
JL. Raya Daan Mogot, KM.21, Pergudangan Era Prima, Blok G, No.22, Tangerang Batu Ceper, 15122 Indonesia.
+021 4587 0923
+021 4587 0923
sales.jakarta@saktisuria.comHelical Worm
| Previous | 2 / 5 | Next |
Features
BLOCK Worm Gear Units are characterised by their robust design. The UNICASE principle, which has been tried and tested since the 1980s provides high functionality, low maintenance and a long service life.
SK 02040.1 Helical Worm Gear Units
NEW: We have thoroughly redesigned our two-stage SK 02040 Helical Worm Gear Units. The new SK 02040.1, made from high strength aluminium, replaces the previous product. The die-cast aluminium housing guarantees maximum strength and rigidity with low weight and can be further protected by additional measures such as the highly effective nsd tupH surface treatment. The SK 02040.1 has a wide power range from 0.12 to 1.1 kW and an output torque of up to 100 Nm. The wide range of speed ratios (from 5.37:1 up to 330:1) enables optimum adaptation to the customer's requirements. The motor can be mounted directly without a coupling or via an adapter (IEC or NEMA).
Characteristics
Fields of use
Version
| Sizes: | 6 |
|---|---|
| Mounting position: | M1 - M6 |
| Ratio: | 4.40 - 7,095.12 : 1 |
BLOCK Worm Gear Units are characterised by their robust design. The UNICASE principle, which has been tried and tested since the 1980s provides high functionality, low maintenance and a long service life.
SK 02040.1 Helical Worm Gear Units
NEW: We have thoroughly redesigned our two-stage SK 02040 Helical Worm Gear Units. The new SK 02040.1, made from high strength aluminium, replaces the previous product. The die-cast aluminium housing guarantees maximum strength and rigidity with low weight and can be further protected by additional measures such as the highly effective nsd tupH surface treatment. The SK 02040.1 has a wide power range from 0.12 to 1.1 kW and an output torque of up to 100 Nm. The wide range of speed ratios (from 5.37:1 up to 330:1) enables optimum adaptation to the customer's requirements. The motor can be mounted directly without a coupling or via an adapter (IEC or NEMA).
Characteristics
- Soft and quiet running
- High overload capacity
- Robust design for long life and easy maintenance
- High axial and radial load capacities enable reliable operation
- Robust grey cast iron housing
- Application-specific versions
Fields of use
- Intralogistics
- Material handling
- Presses
Version
- Hollow and solid shaft gear units
- Push-on, flange and foot mounted versions
- Angled gear units